Best Craftsman Pressure Washer Carburetor Replacements: 6 Tested Picks

If your Craftsman pressure washer cranks but won't stay running, floods every time you pull the cord, or refuses to start at all after sitting in the garage over winter, the carburetor is the most common culprit. Ethanol-blended gas gums up the tiny jets inside within a single off-season, and once that happens no amount of choke-holding fixes it for good. This guide is for Craftsman pressure washer owners who've already ruled out a dead spark plug and stale fuel, and are ready to swap in a replacement carburetor rather than pay a small-engine shop to do it.

Below are six real, currently-listed carburetor replacements that cover the most common Craftsman pressure washer engine codes, from the 2800 PSI CMXGWAS020733 up through the 3200 PSI CR950/XR950 line. Match your engine's model number on the tag before ordering -- these are not universal parts.

Quick comparison

Check price on Amazon

The picks

1. Best Overall: 104M020126F1 Carburetor for Craftsman 2800PSI (CMXGWAS020733)

This is the carburetor to grab if your unit carries the CMXGWAS020733 model number, which covers a big share of Craftsman's 2800 PSI lineup along with the related CMXGMAM1125501/502 engine variants. It's currently Amazon's top pick in this search for a reason -- buyers report a direct bolt-in fit with no fuel line trimming needed.

Pros: Direct fit for the most common Craftsman 2800PSI code, includes mounting gasket, strong recent buyer volume. Cons: Only fits the one engine family -- double-check your model tag first. Skip it if: your unit is a 3000, 3200, or older 1800PSI model; you'll need one of the other picks below.

Check price on Amazon

2. Best for the 3000PSI Line: Replacement Carburetor for CMXGWAS020734

Craftsman's 3000 PSI models use a different carburetor casting than the 2800 PSI units, and this listing is built specifically for the CMXGWAS020734 code. It's a simple, no-frills part -- just the carburetor itself -- which keeps the price down for owners who already have a spare gasket on hand.

Pros: Purpose-built for the 3000PSI engine code, competitively priced, straightforward one-part listing. Cons: Doesn't include a spare gasket, so budget a few extra dollars if yours is torn on removal. Skip it if: you want a kit that bundles a gasket and spark plug in one order -- see pick #5 instead.

Check price on Amazon

3. Best for the 3200PSI CR950/XR950 Line

Owners of the larger 208cc, 3200 PSI Craftsman/Husqvarna-badged units (CR950, XR950, CR750, model CMXGWAS020790) need a physically different carburetor than the smaller 2800/3000 PSI machines. This listing targets that bigger engine specifically and is priced accordingly, since it's a larger unit with a bigger bore.

Pros: Correctly sized for the 208cc 3200PSI engine family, covers both Craftsman and cross-badged Husqvarna units. Cons: The highest price of the six picks here. Skip it if: your washer is one of the smaller 1800-2800PSI models -- this one won't bolt up.

Check price on Amazon

4. Best Value: Carburetor for 580.767100 / 580.761800 (1800-2800PSI)

Older Craftsman pressure washers built around Briggs & Stratton Intek/OHV engines use the 580-series model numbers stamped near the engine's oil fill. This carburetor is built for that older platform and carries the strongest review count-to-price ratio of the group, with 71 ratings at an 4.4 average.

Pros: Lowest price in this guide, wide compatibility across several 580-series model numbers, solid review history. Cons: Only fits the older Briggs & Stratton-based Craftsman units, not the newer CMXGWAS-coded engines. Skip it if: your machine's tag starts with CMXGWAS rather than 580 -- go with pick #1 or #2 instead.

Check price on Amazon

5. Best Kit: Carburetor & Spark Plug for PW3200 (2800-3300PSI)

If your engine hasn't run in years, there's a good chance the spark plug is fouled along with the carburetor. This listing bundles both parts plus a gasket, which is convenient if you'd rather do the whole tune-up in one order instead of two separate purchases.

Pros: Bundles a spark plug and gasket with the carburetor, wide PSI range compatibility (2800-3300PSI Husqvarna/Craftsman badged units). Cons: Lower average rating than the more specialized listings above, likely reflecting the wider fit range. Skip it if: you already replaced your spark plug recently and just need the carburetor.

Check price on Amazon

6. Most-Reviewed: AUTOKAY Carburetor for 875Exi 190cc (Craftsman/Troy-Bilt)

This carburetor targets the 190cc 875Exi engine shared across some Craftsman and Troy-Bilt pressure washers and small equipment, and it has by far the largest track record of the group with over 500 buyer ratings. That volume makes it a safer bet if your exact engine code is listed in its compatibility notes.

Pros: Massive review history for extra confidence, budget-friendly price, cross-compatible with related Troy-Bilt engines. Cons: Not a match for the CMXGWAS-coded or 580-series engines covered by the other picks. Skip it if: your engine tag doesn't mention 875Exi or 190cc -- verify against the listing's fitment chart first.

Check price on Amazon

How we chose these picks

We started by grouping Craftsman pressure washer carburetors by the engine model code stamped on the shroud, since that's the number that actually determines fit -- PSI rating alone isn't specific enough. From there we favored listings with a documented review history over generic, no-name parts with zero feedback, and we cross-checked that each listing's stated compatibility matched a real, current Craftsman model rather than a vague "universal fit" claim. Price was a secondary factor once fitment and review history were confirmed.

Final verdict

There's no single "best" Craftsman pressure washer carburetor -- the right pick is whichever one matches the model number on your engine's shroud, full stop. If you own the common CMXGWAS020733 2800PSI unit, the top pick above is the safest bet. Owners of older 580-series Briggs & Stratton engines get the best value from the fourth pick, and anyone doing a full tune-up at once should look at the spark-plug bundle. Write down your engine's exact model number before you order, since a carburetor that's a close-but-not-exact match usually won't seat or seal correctly.