Best Maytag Washer Control Panel Replacements: 5 Real Picks
Five genuine, part-number-matched Maytag washer control panel and board replacements for DIYers fixing a blank display or unresponsive cycle.
In this article
- Who this guide is for
- Compare the picks
- The picks
- W11035067 Maytag Washer Main Control Panel/Board/Console
- Whirlpool W11316623 Washer Control Panel Assembly
- Whirlpool W10911042 Washer User Interface (OEM)
- W10803588 Maytag Washer Control Board
- OEM Replacement Maytag Washer Control Panel W11406491
- How we chose
- Buying guide: what to check before you order
- Final verdict
Who this guide is for
If your Maytag top-load or front-load washer is throwing a blank display, unresponsive buttons, or a cycle that won't start even though the motor and pump test fine, the fault is very often the control panel -- the board and touchpad assembly that reads your button presses and drives the wash cycle. This guide is for homeowners and appliance techs doing a DIY repair rather than paying for a service call, who want a real, part-number-matched replacement instead of guessing. Always confirm the exact part number against your washer's data plate (usually inside the door frame or on the back panel) before ordering -- Maytag and Whirlpool share many control board platforms, so cross-reference numbers matter more than the brand name on the box.
Compare the picks
| Photo | Part | Price | Rating | Link |
|---|---|---|---|---|
 | W11035067 Maytag Washer Main Control Panel/Board/Console | $279.95 | New listing | Check Price on Amazon |
 | Whirlpool W11316623 Washer Control Panel Assembly | $183.76 | 5★ | Check Price on Amazon |
 | Whirlpool W10911042 Washer User Interface (OEM) | $152.85 | 4.8★ | Check Price on Amazon |
 | W10803588 Maytag Washer Control Board | $118.99 | 5★ | Check Price on Amazon |
 | OEM Replacement Maytag Washer Control Panel W11406491 | $113.39 | New listing | Check Price on Amazon |
The picks
W11035067 Maytag Washer Main Control Panel/Board/Console
Pros
- Genuine W11035067 part number that matches multiple Maytag top-load models
- Board and console arrive together so wiring harness fitment is straightforward
- Backed by the OEM part's standard fitment guide for MVWB757JW0-series washers
Cons
- Priced at the higher end of the panels in this roundup
- No printed rating history yet, so early buyers are relying on the part number match rather than a long review trail
Skip this one if: you have a lower-cost model that only needs the touchpad and not the full board/console assembly.
Whirlpool W11316623 Washer Control Panel Assembly
Pros
- Sold at a discount off its own list price at the time of writing
- Full assembly, not just a bare board, which simplifies the swap
- Whirlpool part numbers cross-reference cleanly to many Maytag-badged washers built on shared platforms
Cons
- Small review count so far, even though the early feedback is positive
- Buyers should still cross-check the exact replacement part number against their washer's model tag before ordering
Skip this one if: your washer's data plate lists a part number that doesn't match this assembly -- always confirm compatibility first.
Whirlpool W10911042 Washer User Interface (OEM)
Pros
- Genuine OEM part with a strong early rating
- Mid-range price point compared to full console replacements
- Direct replacement for older W10679031 / W10825105 interfaces, common on Maytag/Whirlpool shared-platform washers
Cons
- This is the user interface only -- it will not help if the underlying main control board has failed
- Limited stock swings are common on these OEM interface parts
Skip this one if: diagnostics point to the main control board rather than the button/interface panel -- swapping the wrong part won't fix the fault.
W10803588 Maytag Washer Control Board
Pros
- One of the most affordable boards in this lineup
- Cross-references to several superseded part numbers (W10916226, PS12114298), useful if your washer's original board is discontinued
- Fits the common MVWX655DW1 platform
Cons
- Very small review sample so far
- Being a budget-tier listing, double-check the seller's return policy before installing
Skip this one if: your model isn't on the compatible list -- the superseded part numbers only cover a specific platform.
OEM Replacement Maytag Washer Control Panel W11406491
Pros
- Lowest price point in this roundup
- Direct-fit OEM replacement panel for the W11406491 part family
- Good option for budget-conscious DIY repairs on newer Maytag models
Cons
- No established review history yet
- As with any bare panel, you'll want to verify the harness connectors match your washer generation before buying
Skip this one if: you'd rather buy from a listing with an established review track record -- this one is newer to the marketplace.
How we chose
We focused on control panels and boards sold under genuine OEM part numbers or clearly cross-referenced replacement numbers, since a mismatched panel simply won't connect to your washer's wiring harness. We prioritized listings with real buyer ratings where available, checked that each part ships as either a full assembly (board + touchpad + console) or a clearly labeled sub-component (interface only vs. main board only) so you know exactly what you're getting, and spread the picks across a range of price points from budget bare boards to complete console assemblies. We excluded any listing that didn't show a verifiable Maytag or cross-referenced Whirlpool part number in the title.
Buying guide: what to check before you order
- Match your model number exactly. Pull the model number from your washer's data plate and search it against the listing's compatible-models list -- don't rely on "fits most Maytag washers" claims.
- Know which fault you have. A dead display usually points to the user interface/touchpad; a washer that powers on but won't cycle often points to the main control board. Ordering the wrong one wastes money and downtime.
- Full assembly vs. bare board. Full console assemblies (board + touchpad + housing) are easier to install but cost more; bare boards are cheaper if your existing housing and touchpad are intact.
- Static precautions. Control boards are static-sensitive. Ground yourself and unplug the washer before starting the swap.
Final verdict
For most DIY repairs where you want a complete, drop-in replacement, the W11035067 main control panel/board/console is the safest bet since it replaces the whole assembly at once. If your washer only needs the interface panel and the main board is fine, the Whirlpool W10911042 user interface is the more targeted, lower-cost fix. Budget repairers chasing the lowest total cost should start with the W11406491 or W10803588 boards, but only after confirming the part number matches their washer's data plate.
Frequently asked questions
How do I know if it's the control panel and not the motor or timer?
If the washer powers on, the display lights up but buttons don't respond (or don't respond consistently), or the display is blank while other components like the door lock still work, the control panel or board is the most likely cause. A washer that hums or clicks but never starts a cycle at all is more likely a motor, lid switch, or timer issue -- check those first with a multimeter before ordering a new panel.
Do I need the exact Maytag part number, or will a Whirlpool-branded one work?
Many Maytag washers share control board platforms with Whirlpool, since both brands are made by Whirlpool Corporation. The part number is what matters, not the brand printed on the box -- always match by part number and cross-reference list, not by brand name alone.
Is this a repair I can do myself, or should I call a technician?
Swapping a control panel is a beginner-to-intermediate DIY repair. It typically involves removing a few screws, disconnecting a wiring harness, and reversing the process -- no soldering required. If you're not comfortable working around a plugged-in appliance, or the fault turns out to be wiring rather than the board itself, a technician visit may be worth it.
Will a used or refurbished control board work as well as a new one?
Used and refurbished boards can work, but control boards are one of the more failure-prone parts on a used appliance, so there's a real risk of buying a board that's already partially failing. For a repair you don't want to redo in six months, a new OEM or cross-referenced part is generally the safer choice.
How long does a washer control panel replacement usually take?
Most DIY control panel swaps take 20 to 45 minutes once the replacement part is in hand, including unplugging the washer, removing the top or console panel, disconnecting the old board, and reconnecting the new one.
